ZONE II RATED SKID MOUNTED SINGLE PUMP UNIT/DNV 2.7-1

Single Pumping Unit

  • CATERPLILLAR C15 ACERT 536 BHP @ 2100 RPM, ATEX RATED
  • ALLISON 5 SPEED ATEX RATED TRANSMISSION OFS4700 RATED 600 NHP, MAX TORQUE 1850 LBS.FT/2,508 Nm.
    OR HT750DR ALLISON PNEUMATIC SHIFT TRANSMISSION RATED 499 NHP
  • WEIR SPM TWS600S – 4.5 INCH TRIPLEX PUMP RATED 600 BHP @ 2070 ENGINE RPM AND INPUT PINION @ 450 RPM.
    MAX FLOWRATE 558 USGPM OR 13.2 BPM. MAX PRESSURE RATING OF 6,288 PSI. OR EQUIVALENT TRIPLEX PUMP.
  • HEAVY DUTY FRESH WATER RADIATOR TO COOL THE DIESEL ENGINES BY NON METALLIC FAN WITH HUB PULLEY.
  • ENGINE JAWC HEAT EXCHANGER FOR COOLING THE TRIPLEX PUMP LUBE OIL.
  • ENGINE SCAC OR CHARGE AIR COOLER TO COOL THE CHARGE AIR PRIOR ENGINE INDUCTION.
  • ENGINE JAWC HEAT EXCHANGER FOR COOLING THE ALLISON TRANSMISSION LUBRICATION OIL.
  • 1810 SERIES – SPICER UNIVERSAL BEARING DRIVE SHAFT ASSEMBLY C/W DRIVE COUPLING TO INTERCONNECT
    BETWEEN THE TRANSMISSION AND THE TRIPLEX PUMP C/W ALIMINIUM PROTECTION COVER, WRAPPED WITH EXHAUST
    INSULATION WATERPROOF BLANKET FINISHED WITH FINE STAINLESS STEEL WIRE GAUGE.

 

  • 8″ FLANGE EXHAUST SPARK ARRESTOR/MUFFLER C/W ELBOW, FLEXIBLE JOINTS, STAND PIPE AND RAIN CAP.
  • DONALDSON DRY TYPE AIR CLEANER ASSEMBLY C/W PRE CLEANER.
  • 3 CAN CANNISTER LUBE OIL FILTER-25 MICRONS-W/BYPASS FOR TRIPLEX PUMP.
  • MAGNETIC STRAINER ASSEMBLY FOR TRIPLEX PUMP.
  • 7 USG PLUNGER LUBE OIL TANK C/W 3 WAY VALVE, REGULATOR AND GAGE.
  • SET OF LUBE OIL MANIFOLD ASSEMBLY FOR PLUNGER LUBE SYSTEM C/W SAFETY RELIEF VALVE AND 3 EA HIGH
    PRESSURE CHECK VALVE AND HOSES.
  • EEXE BATTERY BOX WITH 24 VDC DRY CELL BATTERY C/W BREAKER- ATEX RATED – INTRINISICALLY SAFE.
  • 24 VDC, 35 AMP CHARGING ALTERNATOR-ATEX RATED EXPLOSION PROOF.
  • PRIMARY WATER/DIESEL FUEL SEPARATOR
  • OPERATOR CONTROL PANEL ASSEMBLY – MILD STEEL WITH SS316L-2B PANEL PLATE MOUNTED ABOVE TRANSMISSION.
  • FIRE EXTINGUISHER BRACKET C/W BCF FIRE EXTINGUISHER ASSEMBLY
  • 2″ 1502 PRESSURE PROTECTOR (TRANSDUCER) ASSEMBLY C/W 1/4″ HIGH PRESSURE HOSE
  • 2 EA 2″ 1502 X 90 DEGREE ELBOW MOUNTED AT BOTH PUMP DISCHARGE.
  • SET OF SUCTION HEADER ASSEMBLY C/W 2 NOS 4″ FIG. 150 UNION WITH KNOCK-OFF CAP SECURED WITH CHAIN.
  • 50 US GALLON DIESEL TANK C/W BOTH SIDE SIGHT LEVEL GAGE, CHECK VALVE, RETURN VALVE AND HI TEMP HOSES
    WITH SWIVEL FITTINGS, FILLER & BREATHER ASSEMBLY.